4X Racerstar 615 6x15mm 67000RPM Coreless Motor for Eachine E010 E010S Blade Inductrix Tiny Whoop
- Shown in your selected currency.
- Non-USD prices are estimates based on current exchange rate.
4X Racerstar 615 6x15mm 67000RPM Endless Motor for E010 E010C E010S Inline Tiny Whoop Inco Cutter
Specification: Motor diameter 6.0mm Motor length: 15mm – Cylinder diameter: 0.05-0.3 mm – Cable length: 70 mm Weight: about: 1.8g / 1pcs Optional: clockwise motors (With red line), clockwise motions (black, white).
Options: With JST plug 1.25 mm.
Quantity: 4 pieces
1 Working conditions and rated voltage 3.4V DC – Direction of rotation CW and CCW
Voltage range active DC2.0–4.5V DC – Temperature range 10-50 Â° C
Positioner position of the motor. 2. Voltage condition
positionhorizontal or vertical motor. Reliable DC power supply. Unmistakable Measurement
DC Power Supply Controls Ensure Unmistakable Measurement 10-30C 30-95%
If the decision is in doubt, Measurent will have to follow the test conditions. JIS standard (20 + 2C, 65 + 5%)
Per minute 15% 67000 rpm. – Load current not exceeding 200mA max180mA – Starting voltage 0.9V x0.5V DC
Current 240mA5% 240mA Resistance to terminals 0.9 5% 0.9 Insulation resistance 10M minAT 250V DC between motor and body terminals < Attention:
1) Please use the motor during this technology index to ensure the performance of the motor is affected. 2) Do not operate at high temperatures with high humidity and can not be exposed to corrosive liquids and corrosive gases should not be stored and should not be used for more than six 3) Never close the motor shaft while the power is on. Motor will be burnt after the motor shaft is locked for more than 1 second. 4) Do not hit the motor directly.
4 x motor”