GB210 210mm Wheelbase DIY Frame Kit Racing Drone

GB210 210mm Wheelbase DIY Frame Kit Racing Drone

$184.76

BUY | View Photos and Latest Price.
  • Shown in your selected currency.
  • Non-USD prices are estimates based on current exchange rate.

SKU: 188281801
Categories: , ,
Updated: 5 March, 2019

Key Features:
Seat pitch lens (support CMOS CCD – camera board aircraft)
Variable upper body with a plurality of antenna hole, to facilitate fixed antenna
Body fiber 1.5 mm 3 K full carbon.
3mm 3 K carbon fiber arm Rational
Version – easy to install
Can ESC low installed it can be installed in the fuselage
AOMWAY compatible camera mounts 700 online
Specifications:
210mm cell Specifications:
Diagonal wheelbase 210 mm
Rack Weight: 80 g
Support motor 1306 3000KV / 1804 2300KV / 1806 2300KV (1806/4045 suggest paddle inch)
Support propeller 4 or 5 inches.
Color: black feature
Installation: 200 x 165 x 62 mm
Net weight: 91 g
Specifications SP3 Acro:
6DOF
Panel Color: black
On board Size: 35 x 35 x 8 mm / 1.4 x 1.4 x 0.3 inches
Net weight: 23
G Package Weight: 29 g
RS2205 EMAX brushless motor specifications:
Weight: approx. 30 g wires
Wire AWG: 20AWG
Stator diameter: 22mm height
Stator :
5mm shaft diameter 3 mm
Configuration: 12N14P
Motor Diameter: 27.9 mm
Motor height: 31.7 mm
Prop shaft adapter thread: M5
Input: 3-4 S ( 16.8 V 12.6)
KV2300 with BN HQ5045 thrust MAX 1024 g
Detail specifications ONESHOT 30A ESC:
BEC: no current :

30A burst current 35A up to 10 seconds
Bootloader: BLheli
MCU: SiLabs.
Firmware: BLheli 14 – OneShot ready
Battery: 2-6 S Lipo
Size: 35 x 17 mm
Weight: 11 g specifications wires
PCB (5-12 V):
2 oz copper and 4-layer PCB
Solder bridges for different voltage and VTX camera
DC / DC regulator efficiency of a synchronous buck up to 95%
TVS (transient voltage suppressor) for protection DC / DC chip
Dimensions: 36 x 36 mm Weight :
6 g.
Holes: 30.5 mm square area
12.4 16.8 V-1300-1800 mAh (3-4 S) battery (included) br> PCB (5-12 V):
2 oz copper and 4-layer PCB
Solder bridges for different voltage and VTX camera
DC / DC regulator efficiency of a synchronous buck up to 95%
TVS (transient voltage suppressor) for protection of DC / DC chip
Dimensions: 36 x 36 mm Weight :
6 g.
Holes: 30.5 mm square area
12.4 16.8 V-1300-1800 mAh (3-4 S) battery (included) br> PCB (5-12 V):
2 oz copper and 4-layer PCB
Solder bridges for different voltage and VTX camera
DC / DC regulator efficiency of a synchronous buck up to 95%
TVS (transient voltage suppressor) for protection of DC / DC chip
Dimensions: 36 x 36 mm Weight :
6 g.
Holes: 30.5 mm square area
12.4 16.8 V-1300-1800 mAh (3-4 S) battery (included)

Store

Gearbest

Brand

Generic