GEPRC Sparrow V2 MX3 139mm FPV Racing RC Drone w/ F4 20A BLHeli_S 48CH Runcam Micro Swift BNF PNP
- Shown in your selected currency.
- Non-USD prices are estimates based on current exchange rate.
GEPRC Sparrow V2 MX3 139mm FPV Racing RC Drone w/ F4 20A BLHeli_S 48CH Runcam Micro Swift PAL BNF PNPSummary:
GEPRC Sparrow V2 is suitable for 3-inch propeller racing FPV drone. It is assembled and debugged from GEPRC. It adds strength and low wind resistance design advantages. It is more suitable for racing. We offer two versions of PNP (without receiver) and BNF (with frsky recevier).
Brand name: GEPRC
Item name: GEPRC Sparrow V2 FPV Racing Drone
Frame: GEPRC GEP-MX3 139mm wheelbase (4mm bottom plate thickness version)
Motor: GEPRC GEP-GR1408 3750kv
Propeller: GEPRC GEP-P3042-3
GEPRC STABLE F4 MiniTower (GEP-F4-BS20A-VTX58200-M)
Flight Controller: Betaflight F4 OMNIBUS
ESCs: 20A BLHeli_S/Dshot150/300/600
VTX: GEP-VTX58200 48CH Mini FPV Transmitter(OFF/25/100/200mW)
Camera: RunCam Micro Swift 1/3″ 600TVL FPV camera 2.1mm lens CCD PAL
Receiver: Frsky XM Plus (ONLY BNF INCLUDE)
Flight time: 4 minutes
1.The GEPRC flying team carefully calibrations PID, Binding receiver can fly.
2.Aviation aluminum #7075 high precision fuselage, beautiful and strong.
3.Using STABLE F4 Tower, easy install, stable
4.Using Runcam micro swift camera, make sure clarity
5.Power System using GR1408 3750kv Motor and GEP-P3042 propeller
6.Tested the best speed 170km/h+
1 x GEP-MX3 frame kit (4mm bottom plate thickness version)
1 x Runcam micro Swift camera
1 x STABLE F4 MiniTower (GEP-F4-BS20A-VTX58200-M)
4 x GEPRC-GR 1408 (2CW+2CCW)
6 x GEPRC GEP-P3042-3 propellers
2 x Battery strap
1 x Frsky R-XSR receiver (only BNF)