Lichee Pi NanoFW(16M) Cross-Border Core Board ARM 926EJS 32MB DDR with WIFI Module TF WIFI Adapter Development Board Mini PC
- Shown in your selected currency.
- Non-USD prices are estimates based on current exchange rate.
Using F1C100s as the main chip of lichee pi nano, ARM9 architecture, 16KB D-Cache, 32KB I-Cache, supporting boot from SPI Flash or TF card, support USB OTG update load.
Hardware parameters CPU: All-in-one F1C100s, ARM 926EJS, up to 900MHz
RAM: 32MB DDR Integrated
Reserved SOP8 SPI Flash pad (16M Flash )
Board TF card holder, can be started by IT. The module can be added WiFi IT
Universal 40p RGB LCD FPC Block The
Can enter directly into the 40p 4.3 / common screen 5/7 inch (on board backlight driver), via the adapter board can be put into 7/9 inch screen 50p
Support 272×480, 480×800, 1024X600 resolutions and other
Onboard chip resistive touch screen resistive screen support 720p video output Support
Video stream decoding support such as H.264 / MPEG
SDIO can , be used to support the SDIO WiFi module
TWI SPI x2 x3
UART USB OTG x1 x3
TV out x 1, TV 2
Ix Other interface:
PWM LRADC x2
Speakerx2 + Mic x1 x1
Electrical characteristics: 5V USB power supply
Micro; 3.3V5V 2.54mm pin power supply; 1.27mm hole
Stamp 3.3V power supply outputs, selectable input voltage RTC
900MHz Linux operating no-load current 54mA, 250mA operating current screen